Good material or recycled material Four tips to teach you the material truth of acrylic photo frames at a glance
$1.15 available: In StockQuick Overview: Zhejiang Yifang New Materials, with 20 years of production and processing, international standards, and a daily output of 70 tons.
Good material or recycled material? Four tips to teach you the 'material truth' of acrylic photo frames at a glance
A customized acrylic photo frame that cost hundreds of yuan turned yellow, brittle, and cracked in less than half a year - this is not an isolated case, but a common problem with low-quality recycled acrylic. The current demand for acrylic sheets is strong, but at the same time, a large amount of inferior sheets produced from recycled materials are also entering the market. Acrylic made from recycled materials not only has poor transparency, but also has very poor UV resistance. It will turn yellow within six months at most and is prone to cracking under sunlight. How to determine whether the acrylic photo frame in your hand is made of good or low-quality recycled material? The following four moves can be learned immediately.
First move: see through the brightness - good materials are as transparent as crystals
The light transmittance of high-quality acrylic can reach over 92%. The acrylic sheet illuminated with white light emits very pure light without yellowing or blurriness. The appearance of the recycled material board is yellowish, with poor transparency. After light passes through, it turns yellow and hazy, and there may even be bubbles and impurities inside. The appearance color of pure new acrylic board is pure, while the appearance of recycled board is noticeably yellowed - especially noticeable from the cross-section.
Second move: Kanban edge - transparent or yellow
This is the most intuitive method of judgment. Acrylic products produced from imported raw materials should have transparent board edges. If the edges turn yellow, discolored, or dull, it is definitely a defective product; If the color of the board mouth is too yellow, it should be produced from recycled materials.
Third move: Look at the cutting surface - smooth or rough
After cutting, the edges of good acrylic are smooth and even, as if polished, and even have a warm and moist feeling. However, low-quality boards have rough edges, like those sawn out, and white powder may fall off - this is most likely due to the use of a large amount of recycled materials.
Fourth move: Burning test - white smoke or black smoke
Burn the scraps with a lighter (pay attention to safety): new materials emit white smoke, recycled materials emit black smoke. Recycled materials have strong irritant odors during storage, produce irritant odors during cutting, and produce odors and bubbles during combustion.
Why choose Zhejiang Yifang?
As a source manufacturer that has been deeply involved in the industry for many years, Zhejiang Yifang always adheres to 100% new PMMA raw material production and never adds any recycled materials. Our acrylic sheet:
High transparency: The light transmittance far exceeds the industry standard, and the visual clarity is pure and transparent
Strong weather resistance: By adding a special UV resistant formula, the anti yellowing ability is increased by more than 50%, and it can maintain its original color even after years of outdoor use
Accurate thickness: The thickness tolerance is strictly controlled within ± 0.1mm to eliminate the trap of "false thickening"
Affordable price: Direct supply from the source factory, cutting down on intermediate links, and having a better price advantage for the same quality
| product type | pet、ps、acrylic、acrylic mirror、pvc sheet,acrylic sheet |
| thickness | 0.35-300mm |
| Styles | 1220*2440,1220*1830,500*900,50*60,960*1950,700*900/Customization of various specifications and sizes |
| delivery time | 5-8day |
| manufacture | Yifang |
related products
